Mastics

Roskote A51+ Mastic: is a cold applied elastomeric coating for above or below ground protection. Excellent against corrosion in soils saturated with oil and gasoline and above ground against severely corrosive fumes, moisture and salt.

Royston Thick N' Quick Mastic: is a cold-applied hydrocarbon resin base coating for underground protection of all fabricated and structural steel. Premier grade mastic that provides better resistance to water penetration than conventional mastics.

Roskote 201 Coal Tar Epoxy Coating: is a cold-applied, 2 component, polyamide cured, coal tar epoxy for above and below ground protection in severely corrosive environments. Through chemical cross linking, forms a tough adhesion resistant coating to withstand physical damage, impact, temperature variations and underground soil stresses.

Roskote 216 Quick Cure: is a 2 component, zero VOC coating to protect all fabricated and structural steel. It provides excellent adhesion, toughness and dries rapidly. Packaged in 8 oz. pouches to minimize waste, Roskote 216 has a 10-minute life pot.

Royston Wet Set B-822: is a 2 component polyamide cured epoxy formulated for use on wet, submerged or splash zone surfaces. Adheres to dry or wet metal, concrete or wood surfaces in thick films on vertical surfaces without running or sagging to resist adhesion, salt water, fuels, solvents, salts and dilute acids.

Royston Laboratories Division, 128 First Street, Pittsburgh, PA 15238. Tel: 412-828-1500; Fax: 412-828-4826.