Source: ABB Automation Inc. Instrumentation Division
For flowrate measurement of liquids and slurries with electrical conductivities of at least 50 mS/cm, even when the pipeline is partially full
For flowrate measurement of liquids and slurries with electrical conductivities of at least 50 mS/cm, even when the pipeline is partially full
PARTI-MAG II, microprocessor converter with flowrate indication (optionally: fill level) and totalization in engineering units
Especially suitable for flow metering in partially full pipelines (e.g. for rain retention basins, clarifier in- and outflow)
In the partially full flow regime it is unaffected by backflow
Short in- and outlet straight sections: 5xDN upstream and 3xDN downstream of the meter
Minimum required fill level 10 % of the flowmeter diameter
Output signal cut-off activated when level drops below minimum fill level of 10 % DN
Meter size range from DN 150 to DN 2000
ABB Automation Inc. Instrumentation Division, 2175 Lockheed Way, Carson City, NV 89706. Tel: 775-883-4366; Fax: 775-883-4373.
