Runway Sweepers
Source: M-B Companies, Inc.
Center Idler supports, supported by main brush frame
Broom Head
46" x 18' brush
Dual end drive
Sauer Sundstrand 55cc Series 90 motors(2)
Planetary gear box drive
Center Idler supports, supported by main brush frame (2)
Hood 14 ga. steel, with manually adjustable height at both ends
Removable end caps for brush replacement
Deflector, positioned by two (2) 2" x 10" hydraulic cylinders
Broom lift hydraulically controlled by two(2) 3.5" x 4" cylinders and one (1) 3" x 8" cylinder
Hydraulic counterbalance valve on lift/lower hydraulics
Pattern adjustment box, including lift/lower control override for pattern test at head
Down travel control; automatic electric over hydraulic limit
Casters
Pnuematic type, 18 x 7 x 8 radials(2)
Full circle pivot (360 deg.)
Coil spring suspension (2) Adjustable shimmy dampeners(2)
PIVOT
Dual arm pivot with weight transfer to chassis
Weight transfer to chassis front axle approximately 70 %
Swing capability 35 degrees left & right of center
Center of gravity maintained at centerline of vehicle chassis
Swing cylinders, two (2) - 3" bore x 10" stroke
M-B Companies, Inc., 1615 Wisconsin Ave., P.O. Box 200, New Holstein, WI 53061-0203. Tel: 920-898-1560; Fax: 920-898-4588.
This website uses cookies to ensure you get the best experience on our website. Learn more