Product/Service

Spreadator: Salt/Sand Spreader

Source: Snow-way International
The Low Profile, Full Feature SPREADATOR Offers
The Low Profile, Full Feature SPREADATOR Offers:

  • Easy on and off
  • Chute swings out of the way
  • Safer storage with chute off
  • Quick clean out of excess material

    Construction:

    Tough 12 gauge mild steel or 304 stainless steel. One piece sides and sills to minimize rust and corrosion at seams. Full side support bracing. Built for long life and service.

    Engine:

    Fully powered with the all new 8hp Briggs & Stratton EPA approved engine.
    Electric throttle and 3 position positive clutch
    Noise reduction muffler
    Magnetron Electronic Ignition, for quick dependable starts. Lube power oil system and dual clean air filer

    Low Profile:

    From 25" to 27" in height for excellent visibility. No lights are required. Better load balance. Easier loading.

    Capacities:

    From 1/2 yard, 3/4 yard, 1.4 yard and 2.0 yard capacities. Side extensions available. User must not exceed GVWR rating for vehicle.

    Sizes:

    Five, six, and eight foot models in mild steel or stainless steel.

    Controls:

    Electronic state of the art controls with burst-standard-variable speed options. Keyed unit controller. 10 amp fused for safety.

    Conveyer Chain:

    Wider chain slots to reduce bridging - no "v" cover is required. Front idler rollers mounted to two take up bearings for easy adjustment and longer chain life. Spring loaded to maintain tension.

    Snow-way International, 844 West State Street, Hartford, WI 53027. Tel: 262-673-7200; Fax: 262-673-7409.