Product/Service

Architectural Membranes

Source: Royston Laboratories Division

Architectural Membranes
The toughest, easiest-to-install sheet membrane you can specify
The toughest, easiest-to-install sheet membrane you can specify!

Since 1940, Royston Laboratories has been a leader in the corrosion protection industry. Royston's reputation is based on the highest quality products and outstanding technical field support. With our extensive background of working with contractors and engineers, Royston in 1972 developed the most easily installed sheet membrane waterproofing system in the marketplace. In today's construction industry, it is a constant battle to control cost without sacrificing quality. Royston has engineered its membranes with this in mind.

Royston Royal-Gard and Royal-Gard Plus, peel and stick membranes are designed to form a monolithic (one-piece) water-proofing barrier, to be installed on vertical surfaces, and to completely isolate below grade areas of foam insulated concrete from water infiltration.

ROYSTON MEMBRANES ARE / PROVIDE:

  • Internal strength for failure resistance
  • Monolithic installation
  • Repositionable
  • Tear-resistant release film
  • Manufacturers warranty available

Royal-Gard--prefabricated peel and stick reinforced laminate constructed of a non-woven fiberglass, high strength core, sandwiched between layers of high tack polymer modified rubberized asphalt with a polyester top film.

Royal-Gard Plus-- prefabricated peel and stick reinforced laminate constructed of a non-woven fiberglass, high strength core, sandwiched between layers of high tack polymer modified rubberized asphalt. A woven polypropylene top mat is bonded to the top layer of rubberized asphalt to function as a protection barrier during back fill operations in vertical applications.

Royal Gard II--prefabricated peel and stick reinforced laminate constructed of a non-woven fiberglass, high strength core, sandwiched between layers of high tack polymer modified rubberized asphalt. It uniquely is double sided sticky for situations where you may want to adhere insulation or protection board to the outer surface.

Royston 104 AHT-- prefabricated peel and stick reinforced laminate constructed of a woven fiberglass, high strength core, sandwiched between layers of high tack polymer modified rubberized asphalt with a ¼ Mil Mylar top film.

Ice and Water Gard--prefabricated reinforced laminated 50-mil peel and stick membrane consisting of a non-woven glass mat bonded between layers of high tack polymer modified rubberized asphalt.

Royston Thru-Wall Membrane--prefabricated peel and stick laminate constructed of high tack rubberized asphalt compound and a 10-mil polyethylene film.

Royston Laboratories Division, 128 First Street, Pittsburgh, PA 15238. Tel: 412-828-1500; Fax: 412-828-4826.