Product/Service

Control Valve

Source: Modgal Ltd
Capable of handling working pressures up to 25 bars, the C-Valve is engineered to provide stable and accurate regulation over flow rates
Modgal Ltdhandling working pressures up to 25 bars, the C-Valve is engineered to provide stable and accurate regulation over flow rates ranging from a few cubic meters per hour to 600 m³/h without bypasses. The valve offers an opening and closing time of 2-10 seconds, depending on pressure.

The system's design features an online actuator that moves in the direction of the fluid flow. This allows the actuator to be positioned in the midstream. By optimizing the hydrodynamically-shaped actuator for the valve's symmetrical cross-section, the product achieves nearly linear fluid flow, according from the company, suppressing vortices and flow disturbances, as well as minimizing energy losses. The valve can handle flow rates of up to 600 m³/h and has a flow factor of Cv=613 and Kv=525.

The valve components are injection molds from high-performance plastics, including various grades of nylon reinforced with fiberglass. The amount of reinforcement depends on the forces and loads acting on the part. The valve is available in either NC (normally closed) or NO (normally open) configuration.

<%=company%>, PO Box 63, Rosh Pina 12000, Israel; phone: 972-6-691-4222; fax: 972-6-691- 4202