The LT4000/4005/4010 Fiber Optic Mode converters give users the unique ability to convert multimode format to single mode format
Lascomm000/4005/4010 Fiber Optic Mode converters give users the ability to convert multimode format to single mode format or single mode to multimode for data transmission. Lascomm's mode converters are intended for Ethernet, FDDI, and SONET environments and support data rates up to 165 Mbps.
These conversions can benefit users by extending transmission distances and/or enabling different fiber types to be used with dissimilar installed fiber. The LT4010 takes multimode optical-digital information and converts it to single mode for transmission over duplex single mode fiber optic cable for speeds up to 25Mbps. Model LT4005 takes in multimode optical digital information and converts it to single mode format for transmission of speeds up to 165Mbps. Lascomm's mode converters are available with ST and FC type connectors. Power can be either 115/230 VAC or -48VDC.
- Converts Multimode to Single Mode
- Converts Single Mode to Multimode
- Reads Opto-Digital Data up to 165 Mbps
- Increases Distance Between Nodes
- Cross Connects Fiber Types
- Performs Optical Repeater Function
- Ethernet, Token Ring, FDDI, and SONET
- Extend Transmission Distance
- Fiber Optic Repeater
<%=company%> 2009 Dewberry Court, Westlake Village, CA 91361-1810. Tel: 805-496-8053; Fax: 805-497-3606.