Product/Service

RF-4000 Level Switch

Source: Bindicator

The RF-4000 level switch has Bindicator's Pro-Guard electronic protection circuitry that prevents false readings due to build-up of material
Request Information
Bindicator-4000 level switch has <%=company%> Pro-Guard electronic protection circuitry that prevents false readings due to build-up of material on the probe. With Pro-Guard, sticky, dusty or clinging materials on the RF-4000 probe will not affect sensing accuracy. The switch will signal only when the actual bulk of material (dry, liquid or slurry) contacts the probe. This unit will operate on 12 to 24 VDC, 100 to 120 VAC or 220 to 240 VAC power sources, and the SPDT output relay contacts are at 5 amperes. High- or low-level failsafe selection is available and a time delay option can be set for one to five seconds to prevent unwanted relay fluctuations caused by product turbulence

<%=company%>, 150 Venture Blvd., Spartanburg, SC 296306. Tel: 864-574-8960; Fax: 864-578-7308.

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information