Product/Service

Round Meter Boxes

Source: Uponor ETI
Round Meter Boxes
Incorporating two molded flanges at the top and bottom of the meter box, the company's round meter box features a white interior and a black exterior
Uponor ETIng two molded flanges at the top and bottom of the meter box, the company's round meter box features a white interior to ease meter reading and a black exterior to inhibit UV degradation and allow outside storage. An anti-settling flange molded to the bottom of the meter box is designed to retard settling and sinking in soft soils while providing a stable, even platform for the setting. The top flange offers a wide and even seating surface for the cover to minimize encroachment into the setting. A patented Thermo-pak insulating pad can be added to allow the unit to be used in applications where freezing problems may occur. A locating ring is molded to the upper part of the meter boxes and enables the insulation to be dropped to the top of the box.

These lightweight units have a solid wall thickness of more than .550 in., and are designed to accept vertical loads in excess of 20,000 lb freestanding. Sizes range from 15-to 36-in. diameter and to 48 in. deep, and 20-in. diameter boxes are available to 72 in. deep.

<%=company%>, 1600 Stout Street, Suite 1710, Denver, CO 80202; phone: 303-893-1101; fax: 303-893-4140

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information