Submersible Turbine

Jacuzzi Bros.n ranges from 400 GPM to 900 GPM, the eight-in. submersible turbines are a new line of pumps for irrigation, industry, municipal, and commercial applications. The products, ranging from 7-1/2 to 150 HP, feature fluted rubber bearings at all bowls, bronze impellers with a stainless steel taper lock to secure it to the shaft, and a steel sand collar protecting the bracket bearing. The Shaft coupling design can be keyed to pump by set screws and is splined to fit the motor shaft. An O-ring seal and coupling protects the motor shaft spline from abrasives, and upthrust protections is provided by a cadmium plated industrial strength retaining plate. Additional features include:
• Cast iron discharge housing and bearing stage
• Cast iron bowls bolt together for easy service.
• Discharge bearing is grease packed and isolated with a double lip seal
• 6-in. motor fit up to 50 HP, 900 GPM model; 8-in. motor fit on 75, 100, 125, & 150 HP models.
• 6-in. Discharge tapping

<%=company%>, 12401 Interstate 30, PO Box 8903, Little Rock,. AR 72219-8903; phone: 501-455-1234