Product/Service

Loader Angle Broom

Source: Sweepster
Sweepster brooms mount easily to loader arms on industrial loaders, tractors, skid steers and backhoes.
Available in 5-10 ft widths
Sweepster brooms mount easily to loader arms on industrial loaders, tractors, skid steers and backhoes.
Available in 5-10 ft widths, the LH and LCH offer proven quality and performance!

STANDARD FEATURES - LH/LCH Sweepers

  • Brush Head - 6 ft by 32 in diameter brush - Choice of poly, wire, or combination wafers - Covered by 120° hood -Designed for use with 10 in wafers
  • Brush Control - Manual angle change 30° left/right - Brush speed controlled by vehicle's engine - On/off operated by loader tilt cylinder valve, third function valve or optional Sweepster valve, depending on the loader configuration and sweeper mounting - Loader arms lift sweeper; loader must support sweeper weight
  • Brush Drive - Brush powered by orbital hydraulic motor (LH, single motor; LCH, dual motor) mounted inside brush frame, coupled to core by a keyed tapered shaft
  • Hydraulic System - Powered by attachment vehicle's hydraulic system - LH Requires minimum hydraulic system of 10
    gpm @ 2000 psi - LCH Requires hydraulic system of 20-50 gpm @ 2000 psi to operate sweeper
  • Mountings - UNIVERSAL - Sweeper pins on in place of bucket to loader arms - Includes 10 ft hoses and hose quick couplers - QUICK ATTACH - Some quick attaches available or dealer can supply blank - Hose quick couplers are not included for skid steers
  • Sweeper Construction - Brush frame heavy steel tube, plate and angle - Loader mounting frame heavy plate, angle and channel - LH Plate swing offsets brush depending on angle used - LCH Sissor swing centers itself, giving same contact at either angle - Brush is supported by adjustable heavy-duty springs and chains

Sweepster, 2800 North Zeeb Road, Dexter, MI 48130. Tel: 734-996-9116; Fax: 734-996-9014.