Post Side Trailers

VANTAGE tapered, aluminum dump trailers were designed with the user in mind to eliminate the biggest, most perplexing problem in the hauling business... sticking/clogging materials. This problem translates into lost time and dollars, plus the possibility of tip-overs during unloading.

The VANTAGE tapered design allows all loads to slide easily throughout the entire length of the trailer from a narrower to a wider opening. No-clog dumping means increased profits plus an additional safety margin over conventional trailers.

Tapered Body Design

• Floor is 6 inches wider at rear
  
• Tapered design reduces side wear at the rear of trailer
  
• Designed for sticky materials, wet sands, base clay, etc.

Bridge-Truss Body Construction

• Considerably stronger than girdle-type designs
  
• Heavy-duty 4"x4" cross members on close centers eliminate washboarding
  
• Heavy-duty 10-1/2" top rail eliminates side-wall flexing while running down the road during the dump cycle.

Positioning Arms

• Full-width design
  
• 2" diameter steel pins with bushings eliminate repair/replacement associated with rubber-type components

Vantage Trailers, Inc., 29335 Highway 90, Katy, TX 77493. Tel: 800-826-8245 ; Fax: 217-789-1877.