Product/Service

Restrained and Testable Joints

Source: Price Brothers Company
Restrained and Testable Joints
The AWWA Standard bell and spigot joint configuration is said to be appropriate for most installations
Price Brothers Companyandard bell and spigot joint configuration is said to be appropriate for most installations. Consisting of a steel bell ring and spigot ring welded to each end of the steel cylinder, the design assembles to compress a rubber O-ring gasket and forms a bottle-tight joint.

The Snap Ring joint provides restraint for pipe and fittings with diameters with 16 inches to 60 inches.

A testable joint permits an air pressure test of each joint as soon as it is completed. They are available in diameters of 36 inches and larger.

The clamp-type harnessed joint provides restraint for diameters of 66 inches and larger. The two-part harness clamp is positioned around the joint and secured by tightening drawbolts on each side.

<%=company%>, 333 W. First Street, Dayton, OH 45402. Tel: 513-226-8700.