Submersible Pressure Transducers

N/A cable seal system, the Series 700 submersible pressure transducers are fully temperature compensated are datalogger compatible. The system offers a pressure range down to five ft of water column full scale. The transducer can be used in hostile environments encountered in liquid level measurement and control such as sump level, surface water monitoring, cooling towers, evaporation pans and wier level. It is housed in a small rugged package and is constructed with all-welded corrosion resistant 316 stainless steel. A surface mount internal signal conditioning porivdes a power supply rejection of 0.0001% and either a 4-20 mAdc, 0-5 Vdc or mVdc process signal.

This series of transducers is available in a choice of static accuracies from ±0.05% to ±%F.S. Units are approved to FM, CSA and UL for Class I, Division 1, Groups A, B, C, and D; Class II, Division 1, Groups E, F and G, Class II, Division 1 hazardous locations. They also meet CE approval according to EN-50081-2 and EN-50082-2.

Each transducer is shipped with a barrier that is designed to prevent moisture from entering the cable vent tube and a traceable calibration card that specifies input/output conditions and actual data recorded during manufacture. Optional calibration is available. All units are repairable and have low power requirements.

<%=company%>, 34 Research Drive, Hampton, VA 23666; phone: 800-328-3665; fax: 757-865-8744