Product/Service

Vertical Wall System

Source: Anchor Wall Systems
Vertical Wall System
Suitable for transportation, municipality and large commercial projects, Vertica wall systems employ built-in locators to ensure correct alignment and a four-degree batter
Anchor Wall Systemsr transportation, municipality and large commercial projects, Vertica wall systems employ built-in locators to ensure correct alignment and a four-degree batter. Designed for high volume, tall wall projects, this system needs no geosynthetic reinforcement up to 3 ft, so that walls of varying heights can be constructed with engineering and geosynthetic reinforcement. All models feature 3,000 psi minimum compressive strength, a 7% maximum absorption rate, and high quality zero slump concrete material.
Dimensional information for Vertica systems:
• 8 x 18 x 11 in. or 7½ x 18 x 11 in.
• 86 or 80 lbs approximate weight
• 1 ft2/unit or 0.94 ft2/unit depending on size
• ½ in. setback (4-degree batter)

Dimensional information for Vertica Pro systems:
• 8 x 18 x 22½ in. or 7½ x 18 x 22½ in.
• 115 or 108 lbs approximate weight
• 1 ft2/unit or 0.94 ft2/unit, depending on size
• ½ in. setback (4-degree batter)

<%=company%>, 6101 Baker Road, Suite 201, Minnetonka, MN 55345. Tel: 612-933-8855; Fax: 612-933-8833.

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information