Product/Service

Wheel Tensioning System

Source: Bandit Industries, Inc.

Wheel Tensioning System
The manufacturer's 12-in. and 18-in.-dia. capacity hand-fed tree and brush chippers are now equipped with a new spring
Request Information
Bandit Industries, Inc.turer's 12-in. and 18-in.-dia. capacity hand-fed tree and brush chippers are now equipped with a new spring feed wheel tensioning system. The system applies zero pressure at the pinch point, allowing the wheels to easily climb larger pieces of material being fed into the chipper. Once the feed wheels open to approximately 6 in., pressure is applied to the material. As the wheels open further, additional pressure is applied, increasing the system's ability to crush and compress limbs and branches. The system also limits movement inside the infeed hopper, making it easier for the operator to feed the machine.

<%=company%>, 6750 Millbrook Rd., Remus, MI 49340. Tel: 800-952-0178; Fax: 517-561-2273

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information